BBIER Sales Branch USA Company Investment (Joint Ventures) bbier's led lights pass the certification of UL,DLC,ETL,CE,Rohs,SAA,FCC,ISO,TUV
Home > LED Troffer Light > Smart Lighting Control Systems for LED Troffer Light > LED 2x2 Recessed Troffers 25W/40W with Smart Lighting Control Systems

LED 2x2 Recessed Troffers 25W/40W with Smart Lighting Control Systems

  • LED 1x4 Recessed Troffers 25W/40W with Smart Lighting Control Systems
  • LED 2x4 Recessed Troffers 35W/50W with Smart Lighting Control Systems

Product Abstract:

The LED 2x2 Recessed Troffers 25W/40W with Smart Lighting Control Systems include PIR Sensor,Daylight Sensor and Microwave Motion Sensor, Wireless Lighting Control,The fixture can be controlled with dimming.Step dimming controls can be programmed with the added feature of controling top level output.


Product Description

How to use wireless dimming controlling led lighting system for led troffer lights?

Control your lights, shades and temperature from anywhere – whether you’re home or away.

GENERAL DESCRIPTION

LED 2x2 Recessed Troffers 25W/40W with Smart Lighting Control Systems, Wireless Lighting Control for 2x2 Troffer Lights, include PIR Sensor,Daylight Sensor and Microwave Motion Sensor, Wireless Lighting Control,The fixture can be controlled with dimming.Step dimming controls can be programmed with the added feature of controling top level output.
 

FEATURES

LED Troffer Benefits:
1) Luminaire destined to send more fluorescent fixtures down the tubes
2) Class-leading performance up to 130 LPW for maximum energy savings – up to 60% less than similar fluorescent solutions
3) Troffer qualifies for DLC which enables enhanced rebates nationwide
4) Remarkably priced for a typical payback of less than one years
5) Choose between 80+ and 90 CRI to enhance the look of any space
6) Ultra-thin height and lightweight design effectively targets a broad range of plenum spaces
7) BBIER Smart Technology intelligent light solution or continuous 0-10V dimming to 5% along with up to 130 LPW efficacy enables compliance with most nationwide energy codes
8) Creates a soft, comfortable lighting experience by utilizing a matte finish design which reduces glare and enables perfect vertical and horizontal light distribution

ADDITIONAL INFORMATION

Item No. BB-RTGD-A-22-D
Rated Watts 25w / 40w
Input Voltage 100-277VAC/50-60HZ  |  200-480VAC available
Luminous Flux 3250lm / 5200lm
Driver Model

UL listed power supply

Beam Angle

120°

Light Source/Count

SMD LED

Color Rendering Index (CRI)

Ra > 80

Operating Temperature -40° ~ 45°
LED Luminous Efficiency >130lm/w
Color Temperature 2700K SW / 3000K WW / 4100K NW / 5000K DW / 5700K CW
Emergency Module Available
Dimming Available
Sensor PIR sensor Dailight sensor Microwave motion available
Control System APP, remote control, touch screen, light control and other control options available
Fixture Material Precision Die Cast Aluminum Housing
Application Offices, Lobbies, Hallways & Conference Rooms in Schools, Municipalities, Libraries, Airports, Healthcare Facilities, Showrooms, Corporate Campuses, Retailers and Hospitality Environments.
The Dimensions L603mm(23.74in) x W603mm(23.74in)
Warranty 5 Years

PICTURES SHOW

LED Troffer Lights size25W 40W LED 2x2 Troffer Light,LED 2x2 Troffer,LED 2x2 Troffer Retrofit Kit25W 40W LED 2x2 Troffer Light,LED 2x2 Troffer,LED 2x2 Troffer Retrofit KitLED1x4 2x2 2x4 Troffer Lights Production

SENSOR MODULE

PIR sensor
Dimming Function:
1.on @ night light
2.off@day light
3.100% on when motion detected(in night).hold time 40"(typical).if no new
motion trigger.
Note:1sensor @ 1 lamp only.
 
Dailight sensor
It supplies a simple and effective solution for daylight harvesting.Connecting to
1-10V interface and using photocell to measure ambient lux level and
automatically calculate how much artificial light is needed,and then convert the
amount of light to 1-10V dimmable control gears(ballasts or LED drivers).1-10V
dimmable control gears adjust the lighting output according to the signal from
the daylight sensor.
Note:1sensor @ 20 lamps Max
 
Microwave motion available
1.As built-in daylight sensor can read brightness value,the sensor dose not
swith on the light if with sufficient natural light.
2.Switch on the light on detection of movement,and switch off after ahold time
when there is no motion detected.
Note:1sensor @ 10 lamps Max

TROFFER CONTROL SYSTEM

1) Support automatic luminance change with embedded daylight sensor.
2) Support automatic CCT change with embedded temperature sensor for CCT light.
3) Support more 500 devices control by one gateway,one app.
4) Support frequency hopping technology for strong anti-jamming ability.
5) Support mesh network, control range is more 50 meters.
6) Support storage of 500 devices QRcodes in gateway.
7) Support schedule settings for each device.
8) Support above 10 mobile devices control on station mode.
9) Support remotely control via internet on station mode.
10) Support remote control/touch panel/handheld dimmer control as optional.
11) Support scene/area/group control based on user preset.
12) Support encryption transmission.
13) Support iOS/Android/Windows app,Suppprt Motion sensor.
 
wireless dimming controlling led lighting system for led troffer lights
 See all Optional Accessories of the control systems, please Contact us & Live Chat

INSTALLATION

Normally. The Traditional Tube Light has the ballast or capacitor or ignitor.

Replace Traditional Tube Light

LED 2x2 Troffer Light installation
1.Remove the Ballast,Capacitor,Ignitor.
2.Only need to put the L(live wire),N(null line) connected to the external power supply.
T-BAR CEILING MOUNTING
STEP 1:
Install the(4) supplied T-Bar clips onto the mounting bracket on the utside of the
housing.See picture 1.
STEP 2:
Put the troffer into the T-Bar Ceiling panel and attach the clips on the housing
onto the T-Bar.
STEP 3:
Fix the safety cable at the back side of the house to the ceiling incase the troffer
drop down.
LED Troffer Lights T-BAR CEILING MOUNTING
SUSPENDED MOUNTING
STEP 1:
Attach customer supplied cables to the(2) cable slots on each corner of the troffer
housing.See picture 2.
STEP 2:
Attach customer supplied cables to mounting surface using customer supplied
hardware.Ensuring that mounting surface can support the luminaire.
LED 1x4 Troffer Lights installation wiring
1.Connect the RED fixture lead to LINE(+)supply lead.
2.Connect the BLACK fixture lead to the COMMON(-)supply lead.
3.Connect the GREEN/YELLOW GROUND wire from fixture to supply ground.
4.If any,connect VIOLET to 0/1-10V SIGNAL(DIM+)supply lead and GRAY to EUTRAL/REFERENCE(DIM-) supply lead.(see picture 3)
REMARKS:All unused leads must be capped and insulated.

APPLICATION

LED 1x4 Troffer Light applicationLED 1x4 Troffer Light application
Related Products

Inquiry Information

  • *Subject:

  • *Content:

  • *Telephone Number:

  • *Your E-Mail:

  • *Confirm Text:

    captcha

Categories

Subscribe Newsletter

Don't miss the opportunity, Fill in your details it takes only 5 seconds

Contact Us

qq
skype
msn