Photocell Remote for Motion Sensor
Function：Performance
ON/OFF：Turn ON and OFF the light
Evening Light：Keep the light at 10% output.
Lowest @utput：Dim the light to lowest 10% output.
DIM-：Every press will dim light 10%6 darker.
DIM +：Every press will dim light 10% brighter.
Highest Output：Dim the light to highest 100% output.
Holdtime @ptions：The time period keeping light at present brightness, can be 5min/10min30min.
Standby Period：Dlt means 0S holdtime.
Options：The time period keeping light at standby output, can be 5 min10min/30min.
Daylight Disable：Glt means 0S standby period.
Cloud Mode：It means daylight disabled.
Dusk Mode：It means ambient brightness of cloudy days, daylight is around 100-200lux.
Dusk Mode：It means ambient brightness of dusk, daylight is around 50-100lux.
Very Close：It means ambient brightness of dusk, daylight is around 10-50lux.
Cl0se：Very close detection area, about im-2m.
Medium：Close detection area,about 2-4m.
Far：Medium detection area, about 3-5m. Fardetection area, about 5-7m.
Remote’s Performance
1. When using the remote conrol, the remole control indicator light wl be ON eveny time you press the seting, and the ight wil also lash once (bink mode), except for the
ONOFF button.
2. when selting brightness Setings and night light mode, the remote control indicator is on, but the lamp will not blink mode.
3. The light is off but the inducion is walting to be triggered. At this time, the remote control setting is used.
Night light mode
1. Directly press the small night light button to enable the application, and the light becomes the minimum brightness.
2.In the night light mode, other functions can also be set.
Manually Dimming
1.Mlanually dim the light to highest 100%6 or lowest 10% output.
2.Manually dim the light, 10% change after every press.
Daylight Threshold (Ã》)
1.ight sensor selings are divided inlo lour optons gear (lght losedcdoudy dayleveninghigh.ight sensors are sel as dosing, sensors,as ong as someone moving deleced
the light;
2.Light sensars are set o (coudy daveveninganighl, aler someone moving sensor delects igh saring test environmen brighines, he envronment ightbighines is les than
the set value, whereas greater than the set value when the lamp is not brighi.
Detection Area(()
The inducion distane of the sensor is set with four oplions,which are: very short distanceshor disancemedum disancalar dislance; When someone moves within the
senscrs setrange,thesensorlreaerS.
Hold time and Standby Period
1.f both holdtime and standby period are preset as 0S, the sensor changes to “always ON” mode.
2.f hollime resentas 0S and standby penod as 5minv/f0min30min, afer molion leaves the detecion area, the sensor wl dim dowm light to 50% and keep it for a standby period
3.f holdime is preset as 5min/t0min30min and standby period as 0s, afer molion leaves the deteclion area, the sensor wilkeep ight for the holdime period then dim the ight to
50% and keep it on with infinite standby pericd.
4.lf holdlime and slandby penod are boh preset as 5min/10min!30min, afer molion leaves the detecliona are, itwil keep the light for haldime then dim light to 50% and keep it
for the standby period.
We have over 15 years of commercial lighting R&D experience, 50+ LED lights patents, 200+ LED Lights Certifications, Support OEM & ODM, 3/5 Years Warranty. Our products LED Post Top Lights, Solar Post Top Lights, LED Grow Lights, Explosion Proof Lights, Temporary Work Lights, UFO High Bay Lights, LED Shoebox Lights, etc, which can be widely used in commercial, industrial, residential, and other different occasions.Our factory has an experienced and skilled R&D team, dedicated to constantly innovate, improve product performance and quality. We also have a complete production line, from design, manufacturing to testing, every link goes through strict quality control, to ensure that each product can meet the needs and expectations of customers.We pay attention to customer experience, provide personalized services, and customize the most suitable lighting solutions according to customers' needs and requirements. We also provide comprehensive after-sales service, providing technical support and maintenance services to make customers' experience more smooth and satisfactory.BBIER® adheres to the principle of "quality first, customer first", and is committed to providing customers with high-quality products and services, becoming a trusted partner of customers. We will continue to innovate and improve, bring more value and contribution to customers.
50+ LED Lights Patents
200+ LED Lights Certifications
Поддержка OEM и ODM
WhatsApp:
Tel:
Email: info@bbier.com
Headquarter: No.4/F Bldg 4, 37 Kengwei Ave., Shiyan Town, Bao'an Dist., Shenzhen 518108, China
USA California Warehouse: 42410 Winchester Rd., Temecula, CA 92590
