What are LED Grow Lights?

Answer: LED grow lights is a special led lamps. Its full spectrum aims to help photosynthesis and allow plants to grow in small or no sunlight.

Light Emitting Diode (LED) grow lamp are very suitable for all types of indoor growth and supplementary lighting for outdoor and greenhouse growth.

Contrary to conventional lights, they do not need gas to run in the light bulb, but they are limited to a small diode. The duration of LED lights is longer than the standard incandescent bulbs or HID bulbs (such as metal halide and high -pressure sodium (HPS)) longer, because they do not have filament, which means that they are not easily burned.

This also helps the maintenance and maintenance costs in LED lights, such as changing light bulbs like using old lighting technology. In HPS or metal halide bulbs, it may last for up to 20,000 hours. Now the rated value of most modern LED chips is 100,000 hours, which is 5 times the life of the old technology.

LED also maintains a longer brightness. A lamp will lose half of the brightness until its life. The DLC high -end LED light will 90 % or higher in the output volume in 36,000 hours, and it has been burned for a long time. Another benefit of LED growth lights and HID Grad Light is higher efficiency. The LED light does not produce too much calories, which reduces the cost of overall power consumption, and at the same time it still provides strong lighting options.

This brings another huge advantage of LED in garden lighting. Because it does not require expensive cooling systems and these systems are used to prevent overheating in growth areas and damage the power of crops. LED technology can closely copy the light from the sun to provide solutions for the indoor growth of all types of plants.

LED technologies from innovative companies such as Cree continue to advance. The current LED gardening chip design has a full spectrometry, covering various light wavelengths, making it very suitable for any stage of plant life.

It’s time to get rid of those old HID lights and step into the future of garden lighting with all LED spectral lights.

What do you need to consider when buying led planting lights?

The importance of red -Phytochrome Sensors

Plants transform carbon dioxide into sugar to promote their lives. Literally, the source of life alone. When light is not enough, they can even change the position, angle and shape of the leaves. Somehow, plants seem to be able to identify when they are covered by the leaves of neighboring plants, not the shadow of rocks, buildings, etc., but how do they do it?

Plants can sense the shadow of adjacent plants by using a specific light sensor called plant pigment to sense the ratio between red and far red light. In the shadow formed by the leaves of adjacent plants, the ratio of red to high beam increases, because red light is mainly absorbed by chlorophyll, and the remote red light reflects the leaves. When the ratio of red and far red light increases, plant pigments change its structure from PR to PFR, which will cause reaction to avoid shadows, including increasing the stem elongation by increasing the growth of the growth of plant cells.

Plants also feel seasonal changes in light intensity, during the day, temperature, etc., and decide when to germinate, when to grow and when to bloom. The daily and seasonal changes of plants are planned by the quality and quantity of sunlight and the plant biological clock planning. According to reports, Peri La plants only produce 6 % of seeds when they grow next to the street lights. This is because the biological clock of the plant is troubled by artificial light overnight. Make sure you not only implant appropriate spectrals, but also obtain appropriate spectrals, not only in brightness, but also very important for different growth stages in the time when the pants are obtained. That’s why even outdoor growers and greenhouses use supplementary lighting. As the sun is not only in different seasons, but also changes in different latitude on the earth. By adding supplementary lighting, the growers can simulate the amount of light received by plants in different seasons. This enables planters to plant plants of non -local latitude and plant crops at different stages at any time of a year. These techniques are helping any type of plant planting in any region of the world. This is very important for food production in temperate areas that can not be planted by locals before.

What light spectrum can plants use for photosynthesis

Answer: Optimism usually occurs between 350nm and 780nm wavelengths.

Infrared spectrum helps plant growth
Answer: Below 400nm is IR or infrared. This is the light that people can’t see, but still exist. Photosynthesis usually occurs between 350nm and 780nm. Therefore, studies have shown that within the range of 350-400nm, some IR may be beneficial, mainly to start growth. After the middle stage, it seems to have little effect.

Energy photon

The photon is the light particles of light, which can bring energy from the light. For LEDs, photons are important because they have different colors. For LED lights, the color of the launch of the photon is very important, because the color of the plants is different, so that it will become better or worse according to the color. With Blu -ray photons, plants can distinguish when and the source of light sources in the day. This allows plants to grow more effectively because they grow upward rather than growing outward. Although the red light is higher, it plays a vital role in the flowering process of plants. However, too many red lights will cause plants with unsatisfactory shapes, making it worthless to consumers.

Red lamps are usually between 600-700 nanometers on electromagnetic scale. This is higher than Blu-ray, and Blu-ray occurs between 400-500 nanometers on the electromagnetic scale. The use of blue and red light mixtures, the best use in the process of photosynthesis is essential for health production. With LED technology, you can manually control the light to adjust the two wavelengths of light. That’s why the full spectrum LED is so popular in garden lighting.

Good Packing & Easy Installation

LED grow light fixture is specifically designed to replace natural light, stimulate photosynthesis, and provide a suitable color spectrum to enable plants to grow and prosper. It is an energy-saving lamp used by indoor and greenhouse farmers and cannabis growers.

It can be widely install at indoor greenhouses, farms, container farms, hydroponics, vertical farms and mini gardens so on.

LED grow lights are the most popular plant planting products on the market in recent years. It uses full-spectrum and red light bead ratios, which has a very efficient production capacity to help plant production. Although the price is higher, the damage rate is higher. And the maintenance rate is very low, and the lamp life is relatively long. We have exported thousands units to Norh America already, if any items are meet you interesting, welcome to send us inquiry, thank you.