Guide to Buy The Right Outdoor LED Canopy Light
Outdoor LED canopy lights are an ideal lighting solution for a variety of applications, especially outdoor locations such as parking lots, covered mall walkways, and gas stations. The outdoor LED canopy light of bbier lighting provides low-cost, high-power flood illumination, and is a more durable and longer-life alternative to traditional halogen lamps and metal halide lamps.
LED canopy light fixtures to replace between 70 watts to 400 watts traditional metal halide and HPS lights. They come in square and round shapes with better light distribution and precision optics. Selecting the frosted or clear drop lens for a more diffused light, or the flat lens for more direct light. Outdoor LED canopy lights can be installed flush mount or pendant mount, and have multiple colors can be optional, like white, black, bronze. These LED lighting solutions are used in commercial applications like car washes, loading areas, and small warehouses, as well as residential places like eaves, soffits, and pathways.
These Factors To be Considered Before Buying LED Canopy Lights
What’s your purpose for LED canopy lights? for personal or commercial use? Before you start looking for a good supplier, consider these factors to make sure that you buy the right one.
In recent times. LED lighting has been gaining popularity rapidly because of its benefit to reduce power consumption, save energy, and cut down on electricity bills. It not only lasts a longer lifespan than other conventional lights(HID, HPS light, etc) and offers brighter illumination, but can also be used in various places. In addition, it comes in a wide range of variants to choose from. And LED canopy lights are one such variant.
Speaking of LED canopy lights, they are designed in such a way that they can be easily mounted above any area to achieve direct illumination. These fixtures are also available in a range of wattage options from which you can pick as per your requirements. However, before buying them, there are a few factors that you must consider carefully. Doing so would help you in picking the best product and make your investment worthwhile:
Place of Installation
Determine what you need carefully based on where you are going to install it. LED canopy lights come in different versions that are suitable for interior and exterior usage. So if an option is meant to be installed in your corridor, you cannot use it to light up your garage. The ones designed for outdoor use have a tough exterior capable of resisting environmental elements, like waterproof, waterproof rank choose IP65 to IP67, the material have better to choose die-casting aluminum, it more durable and have a good heat dissipation effect. Therefore, decide the type of light that you should buy first and then start looking for a good supplier.
Appearance Design
While purchasing LED canopy lights, you will get many design options as well. But you must pick the one that ideally helps you to accent the design cues present in the area of installation. Whatever you select should blend with the themes existing in that space.
Guide to buy the right LED Canopy Light
Compare the selected model’s documented performance, service-life basis, warranty and maintenance needs. LED canopy fixtures should not be treated as maintenance-free, and a 50,000-hour claim is not a guarantee for every model. The IES guidance on LED maintenance recommends checking manufacturer reliability data and planning inspection and cleaning.
Lumen and light distribution
Compare measured whole-luminaire lumens and input watts, rather than LED-chip output alone, as explained in the DOE/NGLIA performance guide. Total lumens do not by themselves describe where the light goes. The IES explanation of photometric files shows how light-distribution data supports lighting calculations. Ask for data matching the proposed model and use it to assess the canopy layout and required light levels.
Wattage
Wattage measure the lamp’s energy consumption – not how much light it puts out. Energy-efficient lamps use fewer watts to give off the same amount of brightness (lumen). Because of this, LED (which have typically low wattage when compared with the same lumen) not only helps decrease energy usage but also lowers electric bills.
Color Temperature (CCT)
Color temperature refers to the color appearance of the light that comes from a light source. It’s an important performance characteristic to assess when evaluating lamps because the color temperature creates the mood of the space you are lighting and can thus influence buying behavior or work performance. The apparent color of a light source is measured in Color Temperature. The higher the color temperature, the whiter the light. Our all lights support 2700k-6500k from special warm white to special cold white.
Product documentation and rebate eligibility
Check documentation for the exact model and configuration being quoted. Do not use company-wide certification statements or percentages as a substitute for the selected product’s records. For a U.S. or Canadian rebate project, verify the model’s current DLC Qualified Products List status and the utility program’s requirements before purchase. DesignLights Consortium explains that listings can change and that utilities use QPL data to determine rebate eligibility; DLC does not set the rebates. Ask for the relevant compliance documentation separately.
Finally, keep these things in mind if you are planning to buy LED canopy lights. And once you are done considering them, start looking for an experienced supplier and has a certain scale of the company. Beware of scams that try to deceive people with low-quality products at regular prices. Take your time to locate a suitable manufacturer and supplier who would be able to provide you with high-quality and competitively priced LED canopy lights.
We have over 15 years of commercial lighting R&D experience, 50+ LED lights patents, 200+ LED Lights Certifications, Support OEM & ODM, 3/5 Years Warranty. Which can be widely used in commercial, industrial, residential, and other different occasions.Our factory has an experienced and skilled R&D team, dedicated to constantly innovate, improve product performance and quality. We also have a complete production line, from design, manufacturing to testing, every link goes through strict quality control, to ensure that each product can meet the needs and expectations of customers. We also provide comprehensive after-sales service, providing technical support and maintenance services to make customers' experience more smooth and satisfactory.BBIER® adheres to the principle of "quality first, customer first", and is committed to providing customers with high-quality products and services, becoming a trusted partner of customers. We will continue to innovate and improve, bring more value and contribution to customers.
50+ LED Lights Patents
200+ LED Lights Certifications
Support OEM & ODM

DLC

ETL

ISO

TUV

UL
Tel:
Email: info@bbier.com
Headquarter: No.4/F Bldg 5, 37 Kengwei Ave., Shiyan Town, Bao'an Dist., Shenzhen 518108, China
USA California Warehouse: 308 Green St Fruitland MD 21826




