Temporary Lighting For Construction Sites 40W Work LED Lamp
MOQ: 1 Pcs (Min. Order)
Download: Spec Sheet
Wattage: | 40W |
Model: | BB-HJD-40W-Q2B |
Lumen: | 6000lm |
Replacement: | HPS 150W |
Light Source: | SMD LED 2835 |
Luminous Efficacy: | ≥150lm/w |
Options: | 1.The connector is optional. 2.With emergency power(After the power failure, make sure the lamp can still work for 1.5h). |
Please Send Inquiry, we'll get back to email you in 12 hours.
Description
Temporary Lighting For Construction Sites 40W Work LED Lamp advantages1:
- Illuminating brightness Large range, high brightness, long range,long life of the bulb, The average service life is more than 50000 hours.
- Stainless Steel guard outdoor emergency lighting plug-in-Play.Die cast aluminum lamp body. Air convection design between up anddown of the lamp, promoting the heatdissipation function so that could ensurethe lamp lifespan.with a variety of installation.
- Optional: tripod installation, chain installation, suspension installation,magnet installation,The luminaire could be linkable (40W max link
19pcs; 60w max link 12pcs; 80W max link 9pcs.)
Temporary Lighting For Construction Sites 40W Work LED Lamp advantages2:
- Beam angle:360 degrees.
- Aluminum heat sinks and acve air exchanging cooling system in other to speed up heat disspaon.
- it’s major to replace the CFL/MH/HID/HPS.
- Green, energy saving,long and reliable li of 50,000 hours.
- No RF interference,No IR/UV radiaon, no mercury polluon.
- Streamline exterior design,beauful appearance.
- Environment friendly, energy saving(70-80%).
- Special circuit design,each LED work separately,avoiding the single broken LED influence problem.
Temporary Lighting For Construction Sites 40W Work LED Lamp advantages3:
- U-shaped hook installation:It is easy to hang on various supports, such as tool carts, brackets, etc., so that the lamp can be moved and positioned flexibly, making it suitable for working environments that require a high degree of flexibility.
- Magnet adsorption installation:It can be directly adsorbed on magnetic metal surfaces, such as machines, vehicles, etc. No additional supports are needed. It is easy and quick to install. It is suitable for occasions that require quick setup.
- Ring type installation:The lamp can be hung at a high place through the hanging ring, and the lighting range is wider. It is suitable for places that require a wide range of lighting, such as factory workshops.
- Portable direct use: Flexible and convenient, not restricted by installation location, can be carried and moved at any time, suitable for situations where working positions need to be changed frequently or lighting is temporarily needed.
- Place it directly on the ground with a tripod:Good stability, can be placed directly on the ground for use, no other supports are needed, and it is suitable for occasions where fixed lighting positions are required, such as open-air construction sites, etc.
Parameter
Wattage: | 40W |
Model: | BB-HJD-40W-Q2B |
Lumen: | 6000lm |
Replacement: | HPS 150W |
Light Source: | SMD LED 2835 |
Luminous Efficacy: | ≥150lm/w |
Options: | 1.The connector is optional. 2.With emergency power(After the power failure, make sure the lamp can still work for 1.5h). |
Operation Temp. | -40 to +45℃ |
CCT | 2700K SW / 3000K WW / 4100K NW / 5000K DW / 5700K CW / 6500K SCW |
CRI | 80+ |
Life Span | 50,000 hours at 25℃ |
CCT | 2700K SW / 3000K WW / 4100K NW / 5000K DW / 5700K CW |
CRI | 80+ |
Life Span | 50,000 hours at 25℃ |
Voltage | 100-277VAC/50-60Hz 200-480VAC/50-60Hz available |
Driver | Internal Power Supply.Emergency power supply is optional |
Dimming | Standard: Not dimmable; Dimmable optional. |
Remote Control | Standard: No remote; Remote control optional. |
Sensor | Standard: No sensor; Microwave sensor optional. |
Beam Angle | 360° |
Cover | Transparent, Matte, Lens available |
Lamp Base | Hook Install |
PF | >0.95 |
Warranty | 5 Years |
Download
Video