Solar street lights are raised light sources which are powered by photovoltaic panels generally mounted on the lighting structure or integrated in the pole itself. The photovoltaic panels charge a rechargeable battery, which powers a fluorescent or LED lamp during the night.
Now the solar-powered street light usually uses the LED light source. After years of technological development, the life of the LED light has been stable. The good quality led light can theoretically reach 50,000 hours, 10 hours a day, and can be used for more than 10 years. After years of the practical application of LUXMAN, the outdoor LED light can be achieved more than 5 years of lifetime.
Batteries are more complex. Besides operation temperature and waterproof performance, the types of batteries are also the key factors affecting the life of LED solar street lamps. For example, the cycle times of ordinary lithium-ion batteries are about 500-600 times, while that of lithium iron phosphate batteries(LiFePO4)can be about 2000-2500 times, which will influenceLED solar street lamps lifetime, LUXMAN solar street lamp provides three-year quality assurance because of adopting the LiFePO4 batteries. According to our practical application over the years, it is found that the actual life of the solar street lamp using LiFePO4 batteries can totally reach 3-5 years lifetime.
Most solar panels turn on and turn off automatically by sensing outdoor light using a light source.Solar streetlights are designed to work throughout the night. Many can stay lit for more than one night if the sun is not available for a couple of days. Older models included lamps that were not fluorescent or LED. Solar lights installed in windy regions are generally equipped with flat panels to better cope with the winds.
Latest designs use wireless technology control for battery management. The street lights using this technology can operate as a network with each light having the capability of performing on or off the network.
Solar street lights consist of 5 main parts:
The solar panel is one of the most important parts of solar street lights, as the solar panel will convert solar energy into electricity. There are 2 types of solar panel: mono-crystalline and poly-crystalline. Conversion rate of mono-crystalline solar panel is much higher than poly-crystalline.
LED is usually used as lighting source of modern solar street light, as the LED will provide much higher Lumens with lower energy consumption. The energy consumption of LED fixture is at least 50% lower than HPS fixture which is widely used as lighting source in Traditional street lights. LEDs lack of warm up time also allows for use of motion detectors for additional efficiency gains.
Battery will store the electricity from solar panel during the day and provide energy to the fixture during night. The life cycle of the battery is very important to the lifetime of the light and the capacity of the battery will affect the backup days of the lights. There are usually 2 types of batteries: Gel Cell Deep Cycle Battery and Lead Acid Battery and many more.
Controller is also very important for solar street light. A controller will usually decide to switch on /off charging and lighting. Some modern controllers are programmable so that user can decide the appropriate chance of charging, lighting and dimming.
Strong Poles are necessary to all street lights, especially to solar street lights as there are often components mounted on the top of the pole: fixtures, panels and sometimes batteries. However, in some newer designs, the PV panels and all electronics are integrated in the pole itself. Wind resistance is also a factor.
Each street light can have its own photo voltaic panel, independent of other street lights. Alternately, a number of panels can be installed as a central power source on a separate location and supply power to a number of street lights.
-Solar street lights are independent of the utility grid. Hence, the operation costs are minimized.
-Solar street lights require much less maintenance compared to conventional street lights.
-Since external wires are eliminated, risk of accidents is minimized.
-This is a non polluting source of electricity.
-Separate parts of solar system can be easily carried to the remote areas
-Initial investment is higher compared to conventional street lights.
-Snow or dust, combined with moisture can accumulate on horizontal PV-panels and reduce or even stop energy production.
-Rechargeable batteries will need to be replaced several times over the lifetime of the fixtures adding to the total lifetime cost of the light.