Post garden lamp is a kind of outdoor lighting lamps and lanterns, usually refers to the outdoor road lighting lamps and lanterns is 6 meters, the main components by: light source, lamps and lanterns, light pole, flange and foundation embedded parts of 5 parts, because the garden light its diversity, beautiful sex has the characteristics of beautification and decoration environment, so also known as landscape garden light.
Advantages of garden lights
Solar garden lamp
Solar garden light sunlight for energy, and solar radiation for energy, using solar panels to the battery during the day and night use battery to power a courtyard light source, without complex and expensive pipeline laid, can be arbitrary adjust the layout of the lamps and lanterns, safety and energy saving pollution-free, charging and the on/off process adopts intelligent control, light-operated switch automatically, without manual operation, Stable and reliable work, save electricity, free maintenance.
Solar yard lamp advantages
1, long life: semiconductor chip light, no filament, no glass bubble, not afraid of vibration, not easy to break, the service life of up to fifty thousand hours (ordinary incandescent lamp life is only one thousand hours, ordinary energy-saving lamp life is only eight thousand hours)
2, light health: light does not contain ultraviolet and infrared, does not produce radiation (ordinary light line contains ultraviolet and infrared)
3, green environmental protection: does not contain mercury and xenon and other harmful elements, conducive to recycling and utilization, and will not produce electromagnetic interference (ordinary lamp contains mercury and lead and other elements, energy-saving lamp electronic ballast will produce electromagnetic interference)
4, eyesight protection: DC drive, no stroboscope (ordinary lights are AC drive, will inevitably produce stroboscope)
5, high light efficiency, low heat: 90% of the electric energy into visible light (ordinary incandescent lamp 80% of the electric energy into heat energy, only 20% of the electric energy into light energy)
6, high safety factor: the required voltage, current is small, the heat is small, does not produce safety hazards, can be used in mines and other dangerous places.
Function introduction of garden lamp
Garden light development in the 1990 s, has been widely used in urban slow lane, narrow lane, residential areas, scenic spots, parks, squares, private garden, courtyard corridor of public places such as road one or two volumes for road lighting, improve the security of people travel at night to increase people’s outdoor activities, improve the life and property safety. It can also change one’s mood, elevate one’s mood, and alter one’s perception, creating a palette of light and dark at night. During the day, courtyard lights dot the cityscape; At night, courtyard lamps can not only provide necessary lighting and life convenience, increase the sense of security of residents, but also highlight the city highlights, deduce beautiful style, so that it has been used today, has developed into a mature industrial chain.
The purchase of garden lights
- Detection of light source: Most absorbing dome light is white light, we have white light, some owners when choose lamp will find how some dome light looks brighter, and some are darker, some white, some purple or blue, this is due to the different lighting light source, and color temperature is different, some small manufacturer in the production of light source was photosynthetic efficiency is very low, but in order to let the customer looks brighter, as do the color temperature is high, It looks brighter, but it’s not really brighter, it’s just an illusion of the human eye, and your vision will get worse and worse in this environment for a long time. If the recognition, it is no other light sources, lit a lamp, only then stands in the light reading, if it looks clear, bright, means that the light is good, high light efficiency, if can’t see, is bad, a more simple way, is the hand stretched to light source, to see the color of the palms, if red, the color temperature is just right, color rendering, If the heart is blue or purple, the color temperature is too high.
- look at the electrical appliances: all the fluorescent light source is to have a ballast to light, the ballast can bring instantaneous starting voltage and working stability of the light source, the quality of the ballast, directly determines the life and light efficiency of the ceiling lamp, usually more formal manufacturers of ballast quality is better.
- safety leading, pay attention to details: consumers in the purchase of lighting products when it is necessary to the light source (bulb, light tube), switch, socket every detail to pay attention to, the most reliable way is to buy assured brand products in large shopping malls, and to carefully examine the goods. The lamp acts the role of is given priority to with glass goods, belong to fragile article, through long-distance transport, can appear likely to be scratched or damaged, even if be tiny damage can affect beautiful and use effect, must look carefully when buying so. Qualified switch products must be certified by the state and in line with industry standards. Domestic products through 3C certification, ISO9000 quality system certification, some international brands also obtained other national and international safety certification, these will be marked in the product itself, packaging or instructions, these are also to help you measure the quality of a standard lamps and lanterns.
Product style judgment and selection
A kind of lighting lamps, mainly used in urban roads, residential roads, industrial parks, landscape lighting, tourist attractions, park courtyards, green belts, square lighting and lighting decoration.
Courtyard lights can significantly improve the living environment and the quality of life of residents. During the day, courtyard lamps adorn the cityscape; Courtyard lamps at night can not only provide necessary lighting and facilitate life, increase the sense of security of residents, but also highlight the city highlights, deduce beautiful style.
Cleaning and maintenance of garden lights
Maintenance of yard lights
- Do not hang articles on the lamp, such as drying quilts.
- frequently switch, will greatly reduce its service life, so the use of lamps and lanterns to minimize the switch;
- When the lamp shade is tilted in use or when cleaning, it should be easily corrected to keep it beautiful;
- When adjusting the lampshade, pay attention to avoid the reflection shadow of the three-fork support frame in the lamp when the lamp is on;
- Replace the aging lamp tube in time according to the light source parameters provided by the sign. When it is found that both ends of the lamp tube are red, the lamp tube is black or dark, and the lamp tube is not bright, the lamp tube should be replaced in time to prevent the unsafe phenomenon of burning out the ballast.
Yard lamp cleaning
- Landscape courtyard lighting is generally dusty. When cleaning, use a wet cloth to wipe it.
- Clean the interior of the lamp. When cleaning the lamp, the lamp should be turned off first. If do clean directly on lamps and lanterns, do not rotate the bulb clockwise to avoid lamp cap twist too tight peeling.
To avoid damaging the metal outdoor lighting’s protective lacquer coating:
Don’t use all-purpose, chemical-based cleaners.
Avoid any cleaning products that contain ammonia or alcohol.
Keep away from using abrasive cleaners or rough-textured cleaning cloths.
Cleaning Artisan, True Brass and Copper Outdoor post top garden Lighting
Real brass or copper outdoor (unlacquered) lighting can tarnish or take on an unsightly patina over time. You can create your own safe, natural brass and copper cleaners from everyday kitchen ingredients.
Lemon and Salt
Remove small spots of tarnish on brass or copper by rubbing the cut side of a lemon on the surface. For a more robust cleaner, mix together equal parts table salt, lemon juice and non-iodized cornstarch making a paste. Rub the paste on the surface with a soft, clean cloth. Mix together a bucket of warm water with a little mild, vegetable-based soap. (Castile soap works well.) Use the soapy water to clean the surface, then rinse and dry.
Baking Soda
Baking soda is natural powdered mineral used in the kitchen. It makes a fantastic, eco-friendly alternative to harsh commercial copper and brass cleaners. Mix together two teaspoons of baking soda with a little lemon juice to make a paste. Use the paste, applied to a soft cloth, to polish the surface. For tougher stains sprinkle just baking soda on a damp cloth and then rub over the tarnished area. You can also sprinkle baking soda onto the cut surface of a lemon and then rub. Wash off the paste with a mixture of mild, vegetable-based soap and water. Rinse with clear water and dry with a clean towel.