High quality solar path lights are suitable for installation and use. The improvement of solar lighting technology is conducive to the better development of high quality solar path lights. High quality solar path lights can be installed in country roads, fields, homes, gardens, villas, schools, squares, parks, communities, streets, and corporate lighting. His use place and use development space continue to expand. The high quality solar path lights lighting effect is good, and more importantly, it is very decorative. It has a lighting device and a decorative function at the same time, so that it is not used in urban workplaces, and the appearance is too large. Monotonous, can give people an appreciation.

High quality solar path lights (also known as garden light) is a new type of environmentally friendly lighting fixture. High quality solar path lights has an ancient style, exquisite and elegant, and is full of characteristics of the times. It is easy to install and use without additional wires. It is powered by solar cells and absorbs sunlight automatically during the day. Charge the accumulator in the shell, and automatically (light-controlled) to light up the lighting at night, no need to spend electricity, because of the low-voltage DC power supply, it is safer, more reliable, and has a long service life. Equipped with multi-section combined lamp pole (high-strength ABS plastic), the height of the lamp can be adjusted according to needs, and the installation is very convenient. High quality solar path lights can be widely used in outdoor places such as family villas, unit gardens, parks, green areas, environmental protection communities, and roadsides in front of houses.

Features of high quality solar path lights:
1. Light:
The light does not contain ultraviolet rays and infrared rays, and does not produce radiation (normal light rays contain ultraviolet rays and infrared rays).
2. Super life:
The semiconductor chip emits light, no filament, no bubble, not afraid of vibration, not easy to break, and the service life can reach 50,000 hours (the service life of ordinary incandescent lamps is only 1,000 hours, and the service life of ordinary energy-saving lamps is only 8,000 hours).
3. Green:
It does not contain harmful elements such as mercury and xenon, which is conducive to recycling and utilization, and does not produce electromagnetic interference (ordinary lamps contain elements such as mercury and lead, and electronic ballasts in energy-saving lamps will cause electromagnetic interference).
4. High light efficiency, low heat generation:
90% of the electric energy is converted into visible light (80% of the electric energy of ordinary incandescent lamps is converted into heat energy, and only 20% of the electric energy is converted into light energy).
5. Protect eyesight:
DC drive, no stroboscopic (ordinary lamps are driven by AC, so stroboscopic will inevitably occur).
6. High coefficient:
The required voltage and current are small, the heat is small, and there is no hidden danger, and it can be used in dangerous places such as mines.

The five main steps of installing high quality solar path lights are as follows:
First, the installation location of high quality solar path lights:
The most important thing for solar street lights/solar garden lights is to receive the best light energy, so site selection becomes the first consideration in the installation process of solar street lights. At the installation site, first observe whether there are obstructions and obstacles around the foundation. There should be no trees and high-rise buildings and other obstacles that can affect the light, and it is not allowed to install in a backlit place.

Second, the foundation part of the high quality solar path lights:
1. The size and solidity of the foundation of the solar street light. The solidity of the foundation directly affects the safety of the light pole, so the foundation must be operated in strict accordance with the construction drawings, and important data such as size and material must be grasped.
2. The texture of the land around the foundation of the solar street light. This is also closely related to the safety of the light pole. The soil around the foundation should have low humidity and high strength to prevent unsafe behaviors such as tilting of the light pole under the influence of thrust.
3 solar street light. The threading hole position and smoothness of the foundation. The function of the threading hole is to introduce the battery cable from the underground to the inside of the light pole. If the threading hole is offset, the threading hole will be blocked when the light pole is installed. If there are foreign objects or dead knots in the threading hole, the threading hole will be completely blocked. In both cases, the battery cable cannot be introduced, and the lamp cannot receive effective power.

Third, the threading part
During the threading process of solar street lights, it is absolutely not allowed to have wire connectors inside the poles, and all connecting wires must be guaranteed to be a complete wire. (Except for some light sources with their own leads, when connecting the lamp cap with a wire to the light source line inside the pole, pay attention to the connection, and do a good job of waterproof and leakage prevention. When connecting, pay attention to prevent the lamp cap from falling off due to the influence of gravity ).
Be sure to pay attention to the technique during the threading process, and it is forbidden to pull it hard to prevent the electric wire from being interrupted by the force or the insulation layer is ruptured, which may cause electric leakage.

Fourth, install the LED street light source and solar panels.
The main problem is the firmness of the power cord connection and the tightness of the screws. When connecting all wires, it is necessary to do a good job of preventing off and leaking, and the connection is tight and beautiful.
In the process of tightening the screws, the tightness must be mastered, not too loose or too tight, and the principle of tightening is not moving, and moving in an appropriate amount. It must not be too tight to prevent the screw from being over-stressed and slipping; it must not be too loose to prevent part shifting due to looseness or looseness of some components.
When installing the light board, master the direction. The standard time board faces the south direction, because the light in the south direction is the strongest and the sunshine time is the longest. If it is not possible to face south under special circumstances, the longest light time and maximum light intensity are the principles.

Fifth, the pole
Before the solar street lamp is erected on the pole, remember to check all the power cords to see if there is any leakage of electricity, and correct it as soon as possible. Be sure to pay attention to safety during the erection process. Adjust the direction of the light pole and level it during the process of tightening the corner screws. After all the work is completed, the corner screws must be tightened again to achieve firmness.

The high quality solar path lights use led lighting, and the lamp source has a service life of more than 20,000 hours. And the high quality solar path lightS adopt monocrystalline silicon solar panel or polycrystalline silicon solar panel, equipped with light control timing switch, without manual operation, saving manpower. Although the warranty period of high quality solar path lights is about 25 years, the solar modules can continue to work after 25 years, even if the power generation will be reduced.

Bbier Lighting is a high quality solar path lights supplier with nearly 10 years of R&D and production experience. It has local warehouses in CA and FL in the United States, and can deliver quickly and timely. Our LED street lights provide various wattages of 100w, 150w, 200w, 240w, 320w, etc. The lumens are as high as 4w. All LED street lights have IP65 waterproof and ETL, DLC certification, and are equipped with industry-leading LEDs. The wick and precise aluminum housing make it easy to install. And according to the needs of different light customers, we also provide solar LED street lights. Go to our online store to buy the LED street lights you need now, and enjoy fast logistics and free shipping.

Bbier is a professional LED street light supplier & manufacturer in China with 10 Years of Development
Experience, 50+ Patents, 200+ Certifications. We have Warehouses in California & Florida in USA.

The important thing is that we are a manufacturer, we have our own production line and factory, so we
can also customize different types of LED products according to customer needs.