LED stadium lights can be installed at different heights according to different venues. Therefore the beam angle is also randomly changed. Common installations average 40 to 60 feet, but some projects use as high as 25 inches. Some stadium lights, such as those of large stadiums, may be over 100 meters high and still generate over 300 footballs on the ground, which is an amazing achievement. By comparison, most street lighting and parking lot lighting is located between 20 and 300 feet with a fairly large beam angle, and floor lighting ranges from 10 to 20 foot candles.

What to know about lighting in a stadium?

The biggest charm of watching sports in the stadium is that the audience’s boos, on-the-spot reactions and excited screams can all be displayed. At this time, the role of stadium lighting can be reflected, so that some good scenes can be displayed and the atmosphere of the scene can be highlighted. Some logistical details, such as lighting throughout the stadium, are considered a minority. Many would think that just showing what’s going on is light enough, but more. Stadium lights can be highly dynamic and it is important to understand what is going on if you want to properly illuminate your stadium or field.


Save Money

Compared to traditional lighting fixtures, LED lights use up to 60% less energy. That means you’re saving money every second you use LED lights at the stadium. Combined, you can save quite a lot of money, depending on the number of lights you use in a stadium, baseball field, or even tennis court. In most cases, lighting in a connected utility account can run into the thousands or tens of thousands of dollars per month. Therefore, the use of LED lighting may reduce the budget of universities and municipal stadiums.


Last Longer

One of the biggest major advantages of LED lights is their incredible longevity. Each LED light you install lasts about 5 times longer than a traditional light bulb. This not only saves you the cost of replacing lamps, but also saves labor costs and maintenance costs for maintaining lamps. In some locations, such as inside stadiums, it is very difficult and dangerous to replace and maintain lamps. It requires the use of safety equipment and, in some cases, bucket trucks. This could in turn damage the field, which will require more work to address.

The cost of replacing the bulb must also be taken into account. While upgrading to an LED system may seem expensive, you won’t need to replace your light fixtures as often. In general, the light-emitting diodes of LED systems can be used for more than 30,000 hours. All of this will reduce your stadium’s operating costs and improve the fan experience.

You get control over the lighting

LED stadium lights give you more control over the amount of light produced. In some systems, the color and brightness of the light can be controlled. When it comes to LED lights, there are several possibilities. With Programmable Lighting System, you can customize your lighting system. It might help to excite, congratulate your team, or even scare your opponents. Fans will be happy if the lights flash in your team’s colors during a touchdown.

Such systems are also suitable for light control or to reduce lighting above crowds. This makes it easier to watch the ground activities, and the spectator’s eyes are more concentrated without affecting the effect of watching the game. Because you can detect where and how the light is glowing.


Good heat Dissipation

Compared to traditional light fixtures, LED lights generate much less heat when lit. In fact, LED lamps can be touched by hand when they are lit, because of the low heat. This not only allows them to work more safely, but also keeps the light that needs to be produced. Heat can cause plastics and metals to bend, and LEDs are not a problem.

How to select the lighting for the stadium?

Choose LED chips and drivers with good quality

High-quality LED chips and drivers can provide excellent light efficiency and low failure rate, such as Philips, MEAN WELL and other well-known brands of LED chips and drivers, and it is recommended to use good quality LED chips and drivers for stadium lights.

Select the correct angle of the beam

For different installation areas, there are different beam angles. For example, a wider beam on the floor has a consistent angle but lower brightness, making it suitable for small venues with low heights. While the narrower beam angle is less uniform, it is brighter on the floor but better suited for taller installations. Therefore, we often recommend two types of beam angle combinations to meet different stadium lighting needs.

Good performance of heat dissipation

The lifespan of outdoor stadium lights can be extended with a good cooling system. Using high-quality heat dissipation materials and a first-class heat dissipation system, it can prevent overheating and damage, reduce the failure rate and reduce maintenance costs.

Units Must Resist Water

The LED lights you choose should be waterproof, and some venues will also choose shock-resistant, as the lifespan and efficiency of these units depends on where they are installed. Since these lights will be installed outdoors, they will be affected by many factors such as water and humidity.

Consider the Color Rendering Index

CRI indicates how accurate the color exposure of the LED is. This project indicates the appearance of objects in LED lights, especially the color. Therefore, you will enjoy the best color if the unit has a higher color rendering index. When purchasing LED stadium lights, make sure to choose a CRI rating of 80+.

Glare Of The Lighting

Although glare is rarely considered, it plays a vital role in football field lighting. High glare values can cause visual discomfort to spectators and the illusion of players tracking a fast-moving ball, resulting in errors.

Choosing a premium brand of LED light means you will receive a light with an advanced lens. LED Stadium Lights feature low glare to enhance beam focus and reduce light leakage when needed.

Football stadium lighting is a fusion of art and science, so you need to be thoughtful when choosing your lighting. Various stadiums around the world are working on football pitches for green initiatives. With LED lights, you can not only have perfect stadium lighting, but also contribute to environmental protection and protect the environment.


We hope our guide above helped you choose the best LED stadium lights for your football field. Low glare, uniform lighting, lenses, fixtures, and precise poles are the factors that determine how well a lamp performs. So if your LED stadium lights light up all those boxes, they’re ready to light up your stadium like never before. If you need high quality stadium lights, please contact sales@bbier.com.